I use PCGen on a PIII with 256mb ram :-).  It seems a little slow,  but I
love it.



   _____

From: pcgen@yahoogroups.com [mailto:pcgen@yahoogroups.com] On Behalf Of
Nathan B Hinckley
Sent: Tuesday, July 04, 2006 17:57
To: pcgen@yahoogroups.com
Subject: Re: [pcgen] PCGEN: slowness



It would be nice, but I'm afraid there are far too few of us; and even
fewer volunteer code monkeys.

On 7/4/06, Carlos Quintella <cquintella@yahoo.
<mailto:cquintella%40yahoo.com> com> wrote:
> Hi Guys,
>
> I love PCGEN it is an excellent tool. I started to it a couple of
> months ago and now I think it is almost impossible to live without it.
> The only thing I have to complain is that it requires a lot of
> machine to use. I have a MAC mini (1Gb RAM) and a P3 laptop (256MB),
> and using it sometimes is a difficult job because the system gets
> unresposive due to high CPU usage. I know that this is a side effect
> of a JAVA app but I think you would check the possibility of
> optimizing the code or developing an native MAC OS X interface. Did
> someone thought about this already?
>
> Carlos Q
>
>
>
>
>
>
> PCGen's release site: http://pcgen. <http://pcgen.sourceforge.net>
sourceforge.net
> PCGen's Wiki: http://www.legolas.
<http://www.legolas.org/pcgen/pytw/#Welcome> org/pcgen/pytw/#Welcome
> PCGen's alpha build: http://www.legolas.
<http://www.legolas.org/pcgen/autobuilds> org/pcgen/autobuilds
> PCGen's Online Docs: http://www.legolas.
<http://www.legolas.org/pcgen/docs/> org/pcgen/docs/
> Yahoo! Groups Links
>
>
>
>
>
>
>





[Non-text portions of this message have been removed]

Hi,

On 05/07/06, Edwin Holley <eholley@...> wrote:
> Also, when you purchase from CodeMonkey, you must use an older version
> (1.5.6 as I recall).  And the differences between these two versions is
> becoming significant.
>
The version that CMP data files currently work with is the previous
production version: 5.8.1. You can verify this at
http://codemonkeypublishing.com/modules.php?op=modload&name=News&file=index&cati\
d=&topic=5

--
Cheers,
James Dempsey
PCGen Code Gibbon

Wouldn't ya know it? I tried looking for a "ThisFileIsCompatable" type
token and searched the help, but it didn't occur to me that it might
be an enforced naming convention. Thanks Chuck!

Someone aught to point this out to a Doc Monkey.

On 7/4/06, Chuck Pint <pcgen2006@...> wrote:
> --- In pcgen@yahoogroups.com, "Nathan B Hinckley" <galadare@...> wrote:
>
> > (maddeningly enough, I haven't been able to get PCGen to recognize the
> > OS if I rename it, but that's another matter).
>
> It has to be in the same directory as the other Output Sheets and the
> name has to start with "csheet_". Then it will show up in the export list.
>
> Chuck
> OS Chimp

Well, we always work to optomise the code, but a MacOS native
interface won't be within PCGen scope.  Have you tried using the high
memory options for pcgen?  What version are you running?

Karianna

PS:  I suspect your P3 laptop will always struggle a little with
PCGen, as it takes a good ~128M once you have a few data sets loaded,
your mac mini however should be fine


--- In pcgen@yahoogroups.com, "Nathan B Hinckley" <galadare@...> wrote:
>
> It would be nice, but I'm afraid there are far too few of us; and even
> fewer volunteer code monkeys.
>
> On 7/4/06, Carlos Quintella <cquintella@...> wrote:
> > Hi Guys,
> >
> > I love PCGEN it is an excellent tool. I started to it a couple of
> > months ago and now I think it is almost impossible to live without it.
> >  The only thing I have to complain is that it requires a lot of
> > machine to use. I have a MAC mini (1Gb RAM) and a P3 laptop (256MB),
> > and using it sometimes is a difficult job because the system gets
> > unresposive due to high CPU usage. I know that this is a side effect
> > of a JAVA app but I think you would check the possibility of
> > optimizing the code or developing an native MAC OS X interface. Did
> > someone thought about this already?
> >
> > Carlos Q
> >
> >
> >
> >
> >
> >
> > PCGen's release site: http://pcgen.sourceforge.net
> > PCGen's Wiki: http://www.legolas.org/pcgen/pytw/#Welcome
> > PCGen's alpha build: http://www.legolas.org/pcgen/autobuilds
> > PCGen's Online Docs: http://www.legolas.org/pcgen/docs/
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>

I thought I remembered this being in the docs somewhere...  Chuck?

K

--- In pcgen@yahoogroups.com, "Nathan B Hinckley" <galadare@...> wrote:
>
> Wouldn't ya know it? I tried looking for a "ThisFileIsCompatable" type
> token and searched the help, but it didn't occur to me that it might
> be an enforced naming convention. Thanks Chuck!
>
> Someone aught to point this out to a Doc Monkey.
>
> On 7/4/06, Chuck Pint <pcgen2006@...> wrote:
> > --- In pcgen@yahoogroups.com, "Nathan B Hinckley" <galadare@> wrote:
> >
> > > (maddeningly enough, I haven't been able to get PCGen to
recognize the
> > > OS if I rename it, but that's another matter).
> >
> > It has to be in the same directory as the other Output Sheets and the
> > name has to start with "csheet_". Then it will show up in the
export list.
> >
> > Chuck
> > OS Chimp
>

I am impressed. I posted 3 bugs and all three have been fixed in NO
TIME !

The fix for 1514970 <https://sourceforge.net/tracker/
index.php?func=detail&aid=1514970&group_id=25576&atid=384719>
apparently did not make it into the autobuild. The last production
autobuild is from 1h before you fixed the issues, and no new
autobuild was made.

Thomas/Chipoulou

OK, the autobuilds are still undergoing a little work but if I have
this figured correctly (James correct me if I'm wrong)...

1.)  The 5.10.x autobuilds (leading to the 5.10.1 release) are
occuring, but we do _not_ post those on SF as a DEV snapshot

2.)  The 5.11.x autouilds (leading to a 5.12.0 release) are occuring
and are put up daily? on SF, so you should see my fix appear there
soon (as in today?).

Yes we're going to improve on this :-).

Karianna



--- In pcgen@yahoogroups.com, "Thomas Jannes" <tjannes@...> wrote:
>
> I am impressed. I posted 3 bugs and all three have been fixed in NO
> TIME !
>
> The fix for 1514970 <https://sourceforge.net/tracker/
> index.php?func=detail&aid=1514970&group_id=25576&atid=384719>
> apparently did not make it into the autobuild. The last production
> autobuild is from 1h before you fixed the issues, and no new
> autobuild was made.
>
> Thomas/Chipoulou
>

--- In pcgen@yahoogroups.com, "karianna03" <martijnverburg@...> wrote:
>
> I thought I remembered this being in the docs somewhere...  Chuck?
>
> K

I thought so too, but I can't find it. Under "Output Sheets" is a
section titled "Creating an Output Sheet". Seems a new paragraph
should be in there at the top that talks about directories and file
name conventions...

I've flagged for a Tracker Monkey.

Chuck
OS Chimp

Hi,

The best place to visit to look at the autobuilds is
http://pcgen.sourceforge.net/07_autobuilds.php - this page has links to
the correct download sets and the build reports, which are pretty
comprehensive.

An important thing to note is that builds are only done if changes have
been made, so if the build wakes up and finds no changes it goes back to
sleep. A file and report is only generated if it finds there is
something to work on.

The 5.10.x autobuilds (leading to the 5.10.1 release) are built (see
above) every 4 hours. The generated file is deployed to SourceForge in
the 5.10.x Snapshot 'folder' under the PCGen Z Snapshot Build package.
The files are date stamped (currently GMT, but I'll change it soon to
AEST to match the build report times) so the newer ones are further down
the list.

The 5.11.x autobuilds (leading to a 5.12.0 release) are built (see
above) every 8 hours. The generated file is deployed to SourceForge in
the Dev Snapshot 'folder' under the PCGen Z Snapshot Build package. As
with the 5.10.x autobuilds, the files are date stamped so the newer ones
are further down the list.

Hope that helps to clear up any misconceptions about the autobuilds and
if there are any questions, please fire away.

PS: Checking the prod branch change log indicates that Kar's changes to
fix bug #1514970 are included in the latest prod autobuild, see
pcgen-5.10.x-all-no-libs-20060704.1315.zip
<http://prdownloads.sourceforge.net/pcgen/pcgen-5.10.x-all-no-libs-20060704.1315\
.zip?download>


Cheers,
James Dempsey
PCGen Code Gibbon
Current Custodian of the Autobuilds :)


On 5/07/2006 8:01 PM karianna03 wrote
> OK, the autobuilds are still undergoing a little work but if I have
> this figured correctly (James correct me if I'm wrong)...
>
> 1.)  The 5.10.x autobuilds (leading to the 5.10.1 release) are
> occuring, but we do _not_ post those on SF as a DEV snapshot
>
> 2.)  The 5.11.x autouilds (leading to a 5.12.0 release) are occuring
> and are put up daily? on SF, so you should see my fix appear there
> soon (as in today?).
>
> Yes we're going to improve on this :-).
>
> Karianna
>
>
>
> --- In pcgen@yahoogroups.com, "Thomas Jannes" <tjannes@...> wrote:
>
>> I am impressed. I posted 3 bugs and all three have been fixed in NO
>> TIME !
>>
>> The fix for 1514970 <https://sourceforge.net/tracker/
>> index.php?func=detail&aid=1514970&group_id=25576&atid=384719>
>> apparently did not make it into the autobuild. The last production
>> autobuild is from 1h before you fixed the issues, and no new
>> autobuild was made.
>>
>> Thomas/Chipoulou
>>

I actually meant to put in 5.6.1, but that was wrong as well.  Thanks for
the correction :-).



   _____

From: pcgen@yahoogroups.com [mailto:pcgen@yahoogroups.com] On Behalf Of
James Dempsey
Sent: Tuesday, July 04, 2006 21:42
To: pcgen@yahoogroups.com
Subject: Re: [pcgen] Re: New to PCGen -> some questions :-)



Hi,

On 05/07/06, Edwin Holley <eholley@cox. <mailto:eholley%40cox.net> net>
wrote:
> Also, when you purchase from CodeMonkey, you must use an older version
> (1.5.6 as I recall). And the differences between these two versions is
> becoming significant.
>
The version that CMP data files currently work with is the previous
production version: 5.8.1. You can verify this at
http://codemonkeypu
<http://codemonkeypublishing.com/modules.php?op=modload&name=News&file=index
&catid=&topic=5>
blishing.com/modules.php?op=modload&name=News&file=index&catid=&topic=5

--
Cheers,
James Dempsey
PCGen Code Gibbon





[Non-text portions of this message have been removed]

As the previous french person asking for a french translation, I ask the same
thing, but refering to a Spanish translation.

   I am new with the program, and I have found on the files section (I think) a
translation to spanish for the program, but I don't know how to use it. Also I
would like to know if there is some work to translate to spanish the data sets,
ouput sheets, or any other thing. I so, I would like to offer my help to this
work.

   Thanks!

   Wonderful program!


---------------------------------

LLama Gratis a cualquier PC del Mundo.
Llamadas a fijos y móviles desde 1 céntimo por minuto.
http://es.voice.yahoo.com

[Non-text portions of this message have been removed]

I own an AMD 3000Mhz and 512 Mb RAM, and I have been suffering of that slowness
too. It happens when starting a new character or when performing any operation
involving the opening of a file window. On the last case, it slows also when I
change directory, or when I have to select an output sheet.


   Eduardo.

   P.D.: It seems my messages don't reach to pcgen list, so I'll try to send it
twice and if it fails, I'll resend this message directly to an administrator. It
has happenned with other messages, too.


---------------------------------

LLama Gratis a cualquier PC del Mundo.
Llamadas a fijos y móviles desde 1 céntimo por minuto.
http://es.voice.yahoo.com

[Non-text portions of this message have been removed]

E R <eduardo_rgc@...> escribió:  Fecha: Wed, 5 Jul 2006 10:23:35 +0200
(CEST)
De: E R <eduardo_rgc@...>
Asunto: Also Slowness
Para: pcgen@yahoogroups.com

   I own an AMD 3000Mhz and 512 Mb RAM, and I have been suffering of that
slowness too. It happens when starting a new character or when performing any
operation involving the opening of a file window. On the last case, it slows
also when I change directory, or when I have to select an output sheet.


   Eduardo.

   P.D.: It seems my messages don't reach to pcgen list, so I'll try to send it
twice and if it fails, I'll resend this message directly to an administrator. It
has happenned with other messages, too.

---------------------------------

LLama Gratis a cualquier PC del Mundo.
Llamadas a fijos y móviles desde 1 céntimo por minuto.
http://es.voice.yahoo.com


---------------------------------

LLama Gratis a cualquier PC del Mundo.
Llamadas a fijos y móviles desde 1 céntimo por minuto.
http://es.voice.yahoo.com

[Non-text portions of this message have been removed]

In short yes there is a team and we're gathering volunteers, I've
flagged the team lead to pick you up :-)

K

--- In pcgen@yahoogroups.com, E R <eduardo_rgc@...> wrote:
>
> As the previous french person asking for a french translation, I ask
the same thing, but refering to a Spanish translation.
>
>   I am new with the program, and I have found on the files section
(I think) a translation to spanish for the program, but I don't know
how to use it. Also I would like to know if there is some work to
translate to spanish the data sets, ouput sheets, or any other thing.
I so, I would like to offer my help to this work.
>
>   Thanks!
>
>   Wonderful program!
>
>
> ---------------------------------
>
> LLama Gratis a cualquier PC del Mundo.
> Llamadas a fijos y móviles desde 1 céntimo por minuto.
> http://es.voice.yahoo.com
>
> [Non-text portions of this message have been removed]
>

This is indeed where I found the autobould. Now I've tested this with
both latest Production and Development autobuild, and in both cases I
still get the Bear (Black) as Template on the preview and on the PDF
export.

Thomas/Chipoulou

--- In pcgen@yahoogroups.com, James Dempsey <jdempsey@...> wrote:
>
> Hi,
>
> The best place to visit to look at the autobuilds is
> http://pcgen.sourceforge.net/07_autobuilds.php - this page has
links to
> the correct download sets and the build reports, which are pretty
> comprehensive.
>
> An important thing to note is that builds are only done if changes
have
> been made, so if the build wakes up and finds no changes it goes
back to
> sleep. A file and report is only generated if it finds there is
> something to work on.
>
> The 5.10.x autobuilds (leading to the 5.10.1 release) are built
(see
> above) every 4 hours. The generated file is deployed to SourceForge
in
> the 5.10.x Snapshot 'folder' under the PCGen Z Snapshot Build
package.
> The files are date stamped (currently GMT, but I'll change it soon
to
> AEST to match the build report times) so the newer ones are further
down
> the list.
>
> The 5.11.x autobuilds (leading to a 5.12.0 release) are built (see
> above) every 8 hours. The generated file is deployed to SourceForge
in
> the Dev Snapshot 'folder' under the PCGen Z Snapshot Build package.
As
> with the 5.10.x autobuilds, the files are date stamped so the newer
ones
> are further down the list.
>
> Hope that helps to clear up any misconceptions about the autobuilds
and
> if there are any questions, please fire away.
>
> PS: Checking the prod branch change log indicates that Kar's
changes to
> fix bug #1514970 are included in the latest prod autobuild, see
> pcgen-5.10.x-all-no-libs-20060704.1315.zip
> <http://prdownloads.sourceforge.net/pcgen/pcgen-5.10.x-all-no-libs-
20060704.1315.zip?download>
>
>
> Cheers,
> James Dempsey
> PCGen Code Gibbon
> Current Custodian of the Autobuilds :)
>
>
> On 5/07/2006 8:01 PM karianna03 wrote
> > OK, the autobuilds are still undergoing a little work but if I
have
> > this figured correctly (James correct me if I'm wrong)...
> >
> > 1.)  The 5.10.x autobuilds (leading to the 5.10.1 release) are
> > occuring, but we do _not_ post those on SF as a DEV snapshot
> >
> > 2.)  The 5.11.x autouilds (leading to a 5.12.0 release) are
occuring
> > and are put up daily? on SF, so you should see my fix appear there
> > soon (as in today?).
> >
> > Yes we're going to improve on this :-).
> >
> > Karianna
> >
> >
> >
> > --- In pcgen@yahoogroups.com, "Thomas Jannes" <tjannes@> wrote:
> >
> >> I am impressed. I posted 3 bugs and all three have been fixed in
NO
> >> TIME !
> >>
> >> The fix for 1514970 <https://sourceforge.net/tracker/
> >> index.php?func=detail&aid=1514970&group_id=25576&atid=384719>
> >> apparently did not make it into the autobuild. The last
production
> >> autobuild is from 1h before you fixed the issues, and no new
> >> autobuild was made.
> >>
> >> Thomas/Chipoulou
> >>
>

[ 1517521 ] OS directories and file name convention
https://sourceforge.net/tracker/index.php?func=detail&aid=1517521&group_id=25576\
&atid=748235

--- In pcgen@yahoogroups.com, "Chuck Pint" <pcgen2006@...> wrote:
>
> --- In pcgen@yahoogroups.com, "karianna03" <martijnverburg@> wrote:
> >
> > I thought I remembered this being in the docs somewhere...  Chuck?
> >
> > K
>
> I thought so too, but I can't find it. Under "Output Sheets" is a
> section titled "Creating an Output Sheet". Seems a new paragraph
> should be in there at the top that talks about directories and file
> name conventions...
>
> I've flagged for a Tracker Monkey.
>
> Chuck
> OS Chimp
>

I am not sure who is volunteering since I didn't see
this original message.  If this person could either
contact me directly <boomer70 AT yahoo DOT com> or
head over to pcgen_international and join up and I
will get in contact with you as to how you can help
out.

Thanks for your interest.

-Aaron

--- karianna03 <martijnverburg@...> wrote:

> In short yes there is a team and we're gathering
> volunteers, I've
> flagged the team lead to pick you up :-)
>
> K
>
> --- In pcgen@yahoogroups.com, E R <eduardo_rgc@...>
> wrote:
> >
> > As the previous french person asking for a french
> translation, I ask
> the same thing, but refering to a Spanish
> translation.
> >
> >   I am new with the program, and I have found on
> the files section
> (I think) a translation to spanish for the program,
> but I don't know
> how to use it. Also I would like to know if there is
> some work to
> translate to spanish the data sets, ouput sheets, or
> any other thing.
> I so, I would like to offer my help to this work.
> >
> >   Thanks!
> >
> >   Wonderful program!
> >
> >
> > ---------------------------------
> >
> > LLama Gratis a cualquier PC del Mundo.
> > Llamadas a fijos y móviles desde 1 céntimo por
> minuto.
> > http://es.voice.yahoo.com
> >
> > [Non-text portions of this message have been
> removed]
> >
>
>
>
>
>
>


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

As a followup, what are the exact naming conventions?
csheet: Export characters from the export dialogue.
psheet: Export entire parties from the export dialogue.
eqsheet: Export equipment sheets from the Inventory-Equipment tab.

Spellsheets to export from the Spells tab?
The current ones do have the csheet prefix

  --- In pcgen@yahoogroups.com, "krazhit" <here@...> wrote:
>
> [ 1517521 ] OS directories and file name convention
>
https://sourceforge.net/tracker/index.php?func=detail&aid=1517521&group_id=25576\
&atid=748235
>
> --- In pcgen@yahoogroups.com, "Chuck Pint" <pcgen2006@> wrote:
> >
> > --- In pcgen@yahoogroups.com, "karianna03" <martijnverburg@> wrote:
> > >
> > > I thought I remembered this being in the docs somewhere...  Chuck?
> > >
> > > K
> >
> > I thought so too, but I can't find it. Under "Output Sheets" is a
> > section titled "Creating an Output Sheet". Seems a new paragraph
> > should be in there at the top that talks about directories and file
> > name conventions...
> >
> > I've flagged for a Tracker Monkey.
> >
> > Chuck
> > OS Chimp
> >
>

What about fantasy combined (d20 html sheet)?  I'm not sure whats
going on here, I've got it working locally (same code as autobuild)

K

--- In pcgen@yahoogroups.com, "Thomas Jannes" <tjannes@...> wrote:
>
> This is indeed where I found the autobould. Now I've tested this with
> both latest Production and Development autobuild, and in both cases I
> still get the Bear (Black) as Template on the preview and on the PDF
> export.
>
> Thomas/Chipoulou
>
> --- In pcgen@yahoogroups.com, James Dempsey <jdempsey@> wrote:
> >
> > Hi,
> >
> > The best place to visit to look at the autobuilds is
> > http://pcgen.sourceforge.net/07_autobuilds.php - this page has
> links to
> > the correct download sets and the build reports, which are pretty
> > comprehensive.
> >
> > An important thing to note is that builds are only done if changes
> have
> > been made, so if the build wakes up and finds no changes it goes
> back to
> > sleep. A file and report is only generated if it finds there is
> > something to work on.
> >
> > The 5.10.x autobuilds (leading to the 5.10.1 release) are built
> (see
> > above) every 4 hours. The generated file is deployed to SourceForge
> in
> > the 5.10.x Snapshot 'folder' under the PCGen Z Snapshot Build
> package.
> > The files are date stamped (currently GMT, but I'll change it soon
> to
> > AEST to match the build report times) so the newer ones are further
> down
> > the list.
> >
> > The 5.11.x autobuilds (leading to a 5.12.0 release) are built (see
> > above) every 8 hours. The generated file is deployed to SourceForge
> in
> > the Dev Snapshot 'folder' under the PCGen Z Snapshot Build package.
> As
> > with the 5.10.x autobuilds, the files are date stamped so the newer
> ones
> > are further down the list.
> >
> > Hope that helps to clear up any misconceptions about the autobuilds
> and
> > if there are any questions, please fire away.
> >
> > PS: Checking the prod branch change log indicates that Kar's
> changes to
> > fix bug #1514970 are included in the latest prod autobuild, see
> > pcgen-5.10.x-all-no-libs-20060704.1315.zip
> > <http://prdownloads.sourceforge.net/pcgen/pcgen-5.10.x-all-no-libs-
> 20060704.1315.zip?download>
> >
> >
> > Cheers,
> > James Dempsey
> > PCGen Code Gibbon
> > Current Custodian of the Autobuilds :)
> >
> >
> > On 5/07/2006 8:01 PM karianna03 wrote
> > > OK, the autobuilds are still undergoing a little work but if I
> have
> > > this figured correctly (James correct me if I'm wrong)...
> > >
> > > 1.)  The 5.10.x autobuilds (leading to the 5.10.1 release) are
> > > occuring, but we do _not_ post those on SF as a DEV snapshot
> > >
> > > 2.)  The 5.11.x autouilds (leading to a 5.12.0 release) are
> occuring
> > > and are put up daily? on SF, so you should see my fix appear there
> > > soon (as in today?).
> > >
> > > Yes we're going to improve on this :-).
> > >
> > > Karianna
> > >
> > >
> > >
> > > --- In pcgen@yahoogroups.com, "Thomas Jannes" <tjannes@> wrote:
> > >
> > >> I am impressed. I posted 3 bugs and all three have been fixed in
> NO
> > >> TIME !
> > >>
> > >> The fix for 1514970 <https://sourceforge.net/tracker/
> > >> index.php?func=detail&aid=1514970&group_id=25576&atid=384719>
> > >> apparently did not make it into the autobuild. The last
> production
> > >> autobuild is from 1h before you fixed the issues, and no new
> > >> autobuild was made.
> > >>
> > >> Thomas/Chipoulou
> > >>
> >
>

It does work in fantasy combined.
The HTML uses just the |TEMPLATELIST| whereas the PDF goes more into
detail using |TEMPLATE.%template.NAME|

I replaced
<name>|TEMPLATE.%template.NAME|</name>
by
<name>|TEMPLATE.%template.OUTPUTNAME|</name>

and have the desired outputname on my PDF. For me it is fine like
this. Maybe now it is an OS bug ? :-)

Thomas/Chipoulou



--- In pcgen@yahoogroups.com, "karianna03" <martijnverburg@...> wrote:
>
> What about fantasy combined (d20 html sheet)?  I'm not sure whats
> going on here, I've got it working locally (same code as autobuild)
>
> K
>
> --- In pcgen@yahoogroups.com, "Thomas Jannes" <tjannes@> wrote:
> >
> > This is indeed where I found the autobould. Now I've tested this with
> > both latest Production and Development autobuild, and in both cases I
> > still get the Bear (Black) as Template on the preview and on the PDF
> > export.
> >
> > Thomas/Chipoulou
> >
> > --- In pcgen@yahoogroups.com, James Dempsey <jdempsey@> wrote:
> > >
> > > Hi,
> > >
> > > The best place to visit to look at the autobuilds is
> > > http://pcgen.sourceforge.net/07_autobuilds.php - this page has
> > links to
> > > the correct download sets and the build reports, which are pretty
> > > comprehensive.
> > >
> > > An important thing to note is that builds are only done if changes
> > have
> > > been made, so if the build wakes up and finds no changes it goes
> > back to
> > > sleep. A file and report is only generated if it finds there is
> > > something to work on.
> > >
> > > The 5.10.x autobuilds (leading to the 5.10.1 release) are built
> > (see
> > > above) every 4 hours. The generated file is deployed to SourceForge
> > in
> > > the 5.10.x Snapshot 'folder' under the PCGen Z Snapshot Build
> > package.
> > > The files are date stamped (currently GMT, but I'll change it soon
> > to
> > > AEST to match the build report times) so the newer ones are further
> > down
> > > the list.
> > >
> > > The 5.11.x autobuilds (leading to a 5.12.0 release) are built (see
> > > above) every 8 hours. The generated file is deployed to SourceForge
> > in
> > > the Dev Snapshot 'folder' under the PCGen Z Snapshot Build package.
> > As
> > > with the 5.10.x autobuilds, the files are date stamped so the newer
> > ones
> > > are further down the list.
> > >
> > > Hope that helps to clear up any misconceptions about the autobuilds
> > and
> > > if there are any questions, please fire away.
> > >
> > > PS: Checking the prod branch change log indicates that Kar's
> > changes to
> > > fix bug #1514970 are included in the latest prod autobuild, see
> > > pcgen-5.10.x-all-no-libs-20060704.1315.zip
> > > <http://prdownloads.sourceforge.net/pcgen/pcgen-5.10.x-all-no-libs-
> > 20060704.1315.zip?download>
> > >
> > >
> > > Cheers,
> > > James Dempsey
> > > PCGen Code Gibbon
> > > Current Custodian of the Autobuilds :)
> > >
> > >
> > > On 5/07/2006 8:01 PM karianna03 wrote
> > > > OK, the autobuilds are still undergoing a little work but if I
> > have
> > > > this figured correctly (James correct me if I'm wrong)...
> > > >
> > > > 1.)  The 5.10.x autobuilds (leading to the 5.10.1 release) are
> > > > occuring, but we do _not_ post those on SF as a DEV snapshot
> > > >
> > > > 2.)  The 5.11.x autouilds (leading to a 5.12.0 release) are
> > occuring
> > > > and are put up daily? on SF, so you should see my fix appear there
> > > > soon (as in today?).
> > > >
> > > > Yes we're going to improve on this :-).
> > > >
> > > > Karianna
> > > >
> > > >
> > > >
> > > > --- In pcgen@yahoogroups.com, "Thomas Jannes" <tjannes@> wrote:
> > > >
> > > >> I am impressed. I posted 3 bugs and all three have been fixed in
> > NO
> > > >> TIME !
> > > >>
> > > >> The fix for 1514970 <https://sourceforge.net/tracker/
> > > >> index.php?func=detail&aid=1514970&group_id=25576&atid=384719>
> > > >> apparently did not make it into the autobuild. The last
> > production
> > > >> autobuild is from 1h before you fixed the issues, and no new
> > > >> autobuild was made.
> > > >>
> > > >> Thomas/Chipoulou
> > > >>
> > >
> >
>

--- In pcgen@yahoogroups.com, "Thomas Jannes" <tjannes@...> wrote:
>
> It does work in fantasy combined.
> The HTML uses just the |TEMPLATELIST| whereas the PDF goes more into
> detail using |TEMPLATE.%template.NAME|
>
> I replaced
> <name>|TEMPLATE.%template.NAME|</name>
> by
> <name>|TEMPLATE.%template.OUTPUTNAME|</name>
>
> and have the desired outputname on my PDF. For me it is fine like
> this. Maybe now it is an OS bug ? :-)
>
> Thomas/Chipoulou
>

And a doc problem. There is no "OUTPUTNAME" subtoken listed in the
docs on TEMPLATE. However, this is against the naming convention of
most of the OS tokens. The proper way is either "NAME" or <none> shows
the name. If it's defined, the outputname from the lst file should
replace the name. OUTPUTNAME should not exist or be used.

Chuck
OS Chimp

OK, I'm going to have to sort the rest of this out in the 5.12 series
I'm afraid, I'll open a new bug for it, thanks for the reports and
followup guys!

Karianna

--- In pcgen@yahoogroups.com, "Chuck Pint" <pcgen2006@...> wrote:
>
> --- In pcgen@yahoogroups.com, "Thomas Jannes" <tjannes@> wrote:
> >
> > It does work in fantasy combined.
> > The HTML uses just the |TEMPLATELIST| whereas the PDF goes more into
> > detail using |TEMPLATE.%template.NAME|
> >
> > I replaced
> > <name>|TEMPLATE.%template.NAME|</name>
> > by
> > <name>|TEMPLATE.%template.OUTPUTNAME|</name>
> >
> > and have the desired outputname on my PDF. For me it is fine like
> > this. Maybe now it is an OS bug ? :-)
> >
> > Thomas/Chipoulou
> >
>
> And a doc problem. There is no "OUTPUTNAME" subtoken listed in the
> docs on TEMPLATE. However, this is against the naming convention of
> most of the OS tokens. The proper way is either "NAME" or <none> shows
> the name. If it's defined, the outputname from the lst file should
> replace the name. OUTPUTNAME should not exist or be used.
>
> Chuck
> OS Chimp
>

Hi all,

Due to some fantastic work by James, the autobuilds are back, please
see the following link for details:

http://pcgen.sourceforge.net/07_autobuilds.php

At lvl 13 a monk gets Diamond Body, which gives him SR:10+CL

It seems PCGen does not know which CL to add, because for a lvl 13
Monk I get SR=10 (tested with Homebrew and confirmed with RSRD
complete only using autobuild from 060704).

As workaround I tested SR:10+(CL=Monk) and then got the expected
value of 13. As far as I know, being inside the definition of the
class, the CL=Monk should not be necessary.

Thomas/Chipoulou, very thankful to his players for checking their
charsheet into such detail

[ 1518161 ] [5.10.1 RC2] CL not working inside CLASS
https://sourceforge.net/tracker/index.php?
func=detail&aid=1518161&group_id=25576&atid=384719

Paul W. King
PR SB, BoD

Hello everyone,
I'm new to this group and to PCGen itself.  I've run into a printing
problem I'm hoping someone can help me with.  I select print, choose:
"d20\fantasy\pdf\csheet_dnd_std_grey.xslt" from the list, hit print
and I get: "java.lang.NullPointerException: null" and I don't know
what to do with it.  Any ideas?
Thanks,
Phil

Hello again,
I also was wondering just what .xslt editor is most popular.  I've
never worked with those.  Is there a favored WYSIWYG editor?
Thanks again,
Phil

At the risk of starting an editor/environment war - I use emacs, with the
xae plugin (http://cedet.sourceforge.net/eieio.shtml). I also use GNU XML
library under Cygwin (a unix-like environment), which lets me do command
line statements like xsltrans to execute an XSL statement, or navigate an
XML lib.


On 7/6/06, Phil Martin <ricerocket@...> wrote:
>
>   Hello again,
> I also was wondering just what .xslt editor is most popular. I've
> never worked with those. Is there a favored WYSIWYG editor?
> Thanks again,
> Phil
>
>  __.
>


[Non-text portions of this message have been removed]

--- In pcgen@yahoogroups.com, "Phil Martin" <ricerocket@...> wrote:
>
> Hello everyone,
> I'm new to this group and to PCGen itself.  I've run into a printing
> problem I'm hoping someone can help me with.  I select print, choose:
> "d20\fantasy\pdf\csheet_dnd_std_grey.xslt" from the list, hit print
> and I get: "java.lang.NullPointerException: null" and I don't know
> what to do with it.  Any ideas?
> Thanks,
> Phil
>

Shows like the ampersand problem. Somewhere in your notes, or
equipment if you used an ampersand & in the text, it causes this
problem. Otherwise, if that's not it, please tell us:
Version of PCGen
Version of Java
Version of your Operating System

Chuck
OS Chimp

Well, I doubt they'd work on my Windows XP computers <grin>
Any Windows suggestions?
Phil


--- In pcgen@yahoogroups.com, "Richard Bowers" <richard.bowers@...> wrote:
>
> At the risk of starting an editor/environment war - I use emacs,
with the
> xae plugin (http://cedet.sourceforge.net/eieio.shtml). I also use
GNU XML
> library under Cygwin (a unix-like environment), which lets me do command
> line statements like xsltrans to execute an XSL statement, or
navigate an
> XML lib.
>
>
> On 7/6/06, Phil Martin <ricerocket@...> wrote:
> >
> >   Hello again,
> > I also was wondering just what .xslt editor is most popular. I've
> > never worked with those. Is there a favored WYSIWYG editor?
> > Thanks again,
> > Phil
> >
> >  __.
> >
>
>
> [Non-text portions of this message have been removed]
>